
How to prepare your car for winter
Winter is a time when we need to take particular care of our vehicle. For the car to get through the winter season in the best possible condition, it needs to be prepared for it. And protected…
Winter is inevitably approaching. It is a very difficult time for our cars. Lying snow, mud, salt and sand, as well as low temperatures, pose a considerable threat to the bodywork, tyres and metal parts. It is therefore worth spending a few minutes reading about this important topic of protecting your paint for winter.
The most effective way to protect the bodywork against harmful factors is mechanical protection, which involves fitting a special film. It is, however, a fairly expensive procedure and few drivers decide on it. The most common method is to protect the paint with chemical products.
To prepare the car for the winter season, start with a thorough wash of the body. It is best to wash the car by hand. Touchless car washes make washing easier but, unfortunately, they are not thorough, and the chemicals used in them are quite strong and can often damage the bodywork. The point of this wash is to remove all dirt from the body very thoroughly – a detailed description of how to wash a car safely and thoroughly was given in our previous article.
The wash should reveal any defects in the paint – scratches, chips, corroding spots, traces of asphalt or tar. To remove any scratches and contamination bonded to the bodywork, it is better to go to professionals. Such a procedure is very time-consuming and requires specialist equipment. In the first phase it involves claying, i.e. deep cleaning of the bodywork with a special clay bar. The paint clay picks up all the deposits from the paint together with the remains of old wax coatings. The clay does not reduce the thickness of the paint layer, but it does not remove scratches either. The next step is therefore filling the scratches and making up for any missing paint.
Now the bodywork is ready for polishing. There are two ways to polish: by machine or by hand. Machine polishing requires a good-quality polisher and the appropriate skills and experience. Machine polishing gives much better results, but if done unskillfully it will destroy the paint layer.
After polishing it is time for waxing or applying a coating. This is the procedure that will protect the bodywork. Waxing gives the paint depth and gloss, and dirt will not stick to the paint surface, so the car stays clean for longer. There is a whole range of waxes on the market, such as: wax-only, wax-cleaning-polishing, colour-enhancing, scratch-masking and so on. They can be applied touchless on a wet car – a quick and easy method, but with weak protective effects – or by hand using at least two microfibre towels, one for applying the product and the other for polishing and removing excess – an effective method, but one that requires a lot of work and time. Applying a coating is a procedure that will be carried out by a professional car care studio.
Protecting the body before winter is an important procedure, because it means the car will serve us for longer. It is worth visiting professionals, who will do it efficiently and effectively.
We’ll answer your questions
Want to know more about our services or need advice? Get in touch!
- Ceramic coatings applied
- 1 252
- Cars polished
- 1 682
- Car interiors deep-cleaned
- 2 187
- Cars washed
- 43 098
- Headlights restored
- 1 690
